Roland EGX-360 Rotary Gift Engraver
Product Description
Model | EGX-360 | |
---|---|---|
Workpiece-table size |
Width x depth: 12 x 9.1 in. (305 x 230 mm) |
|
Cuttable Materials |
Flat Engraving/ Cylindrical Engraving |
Acrylics, aluminum, brass, stainless steel, and glass (*) |
Ring Engraving, Inner or Outer Surface (**) |
Brass, silver, gold, etc. |
|
Loadable Workpiece Weight (when using the motorized vise jaw) |
9.4 lbs (4.3 kg), including the weight of jig |
|
X, Y, and Z Operation Strokes |
X, Y, and Z: 12 x 9.1 x 1.6 in. (305 x 230 x 40 mm) |
|
Maximum Angle of Rotation |
During engraving: ±360° |
|
X-, Y-, Z-, and A-axis Drive System |
Stepping motor |
|
Operating Speed |
X and Y axes: 0.004 to 2.4 in./sec (0.1 to 60 mm/sec.) |
|
Mechanical Resolution |
X and Y axes: 0.0001 in./step (0.0025 mm/step) |
|
Spindle Motor |
Brushless DC motor, maximum 50 W |
|
Spindle Speed |
5,000 to 20,000 rpm |
|
Tool Chuck |
Cutter holder, collet method |
|
Loadable Workpiece Thickness |
Maximum 3.1 in. (80 mm), 3.0 in. (78 mm) when nose unit is used |
|
Interface |
USB (compliant with Universal Serial Bus Specification Revision 1.1) |
|
Internal Memory |
4 MB |
|
Control Command Set |
RML-1 |
|
Required Power-Supply |
Voltage and frequency: AC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz (overvoltage category II, IEC 60664-1) |
|
Power Consumption |
80 W |
|
Operating Noise |
During operation: 60 dB(A) or less (when not cutting), during standby: 40 dB(A) or less (as specified by ISO 7779) |
|
External Dimensions |
Height x width x depth: 29.8 x 25.2 x 26.6 in. (755× 639× 675 mm) |
|
Weight |
186 lb (84 kg) |
|
Installation Environment |
Operating environment: Temperature of 41 to 104°F (5 to 40°C), 35 to 80% relative humidity (no condensation) |
|
Included Items |
Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), diamond scriber (diameter 4.36 mm), flat table, spare mounting screw (for the cutter holder), wrench, solid collet for diamond scraper (diameter 4.36 mm), solid collet (diameter 4.36 mm) , solid collet (diameter 3.175 mm), Cylindrical-engraving adapter, cup cones, face plates, Standard jigs, Pen jigs, water nose attachment, face-plate mounting screws, standard-jig retaining screw, pin jigs, flat-table securing screw, hexagonal screwdriver, hexagonal wrench, handy panel, adhesive sheet, lubricant filter, vacuum adapter for chip cleaning, Dust tray, USB cable, Roland Software Package CD-ROM, Roland EngraveStudio CD-ROM, Roland EngraveStudio Software Guide, and EGX-360 Startup and Maintenance Guide. |
|
Supported Operating Systems |
Windows 2000/XP/VISTA (32 bit only) |