Mimaki CJV30-60 Printer/Cutter (24-inch)
Price: $1,472.00
Mimaki CJV30-60 Printer/Cutter (24-inch)
The CJV30-60 is the first small format print and cut solution for easy production of high quality prints.
Its unmatched performance and production make the CJV30-60 the ultimate print & cut solution for signmakers and other print service providers looking to enter the market for small format production of high quality seals, labels, stickers, A1 posters, promotional prints and point of purchase displays.
Summary:
- High quality printing up to 1440 dpi
- Maximum printing speed 17.5 m2/h
- Automatic switching from printing to cutting
- Continuous crop mark detection for accurate contour cutting
- Simultaneous white and full colour printing
- Sparkling Metallic ink
- Continuous printing with the Uninterrupted Ink Supply System
- RIP, cutting, and creation software included
Mimaki CJV30-60 Printer/Cutter (24-inch)
Technical Specs & Details
Model | CJV30-60 | ||||
Maximum printing width | 610mm (24.0") | ||||
Print resolution | 540dpi, 720dpi, 1440dpi | ||||
Print mode | 540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi | ||||
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi | |||||
1,440 x 1,440dpi | |||||
Ink | Type | Solvent ink: ES3 | |||
Capacity | 4-colour mode: 440cc cartridge x 2/colour = 880cc/ colour | ||||
6-colour mode: 440cc cartridge x 1/colour = 440cc/ colour | |||||
Media | Width | 620mm (24.4") | |||
Thickness | Less than 1.0mm | ||||
Roll weight | Less than 25kg (55lbs.) | ||||
Roll diameter | Inside: 2 inch, 3inch / Outside: Less than Ø 180mm (7.1") | ||||
Maximun cutting speed | 30cm 11.8"/s | ||||
Cutting force | 10-350g | ||||
Applicable tools | Cutter, Water based ball-point pen, oil based ball-point pen | ||||
Media cutting | Cutting in the Y direction by the cutter on the head | ||||
Media heater | Pre / print / post heater | ||||
Media take-up device | Roll take-up device (Standard) inside, outside selectable | ||||
Command | MRL-III, MGL-IIc2 | ||||
Interface | USB 2.0 | ||||
Applicable standard | VCCI class A, FCC class A, UL60950, CE Marketing (EMC directive, low voltage directive) CB, report | ||||
Power | AC100~240V, less then 1,380VA | ||||
Operational Environment | 20ºC ~ 35ºC (64~95ºF), Humidity:35~65%RH (No condensation) | ||||
Dimentions |
W=1,524mm (60") x D=739mm (29.1") x H=1,424mm (56.1") |
||||
Weight | 110kg (242lbs.) |
- Some of the samples in this website are artificial renderings.
- Specifications, design and dimensions stated in this website may be subject to change without prior notice(for technical improvements, etc).
- The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
- Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
Mimaki CJV30-60 Printer/Cutter (24-inch)
Warranty Information
1 Year Manufacturer Warranty.
Featured